E-Bike Conversion Kit 3000W BLUE — Rear Hub Motor, Full Electronics Package

Built for Off-Road Performance — Not Compromise

The E-Bike Conversion Kit 3000W BLUE is a complete, high-power off-road conversion built around a 3000W brushless rear hub motor, a Smart Sine Wave 48V–72V 45A controller, and bold blue-anodised double-wall MTX wheels front and rear. Everything needed to transform any standard mountain bicycle into a formidable electric off-road machine — in one box.

For the same specification in other finishes, the 3000W range is also available in BLACK, RED, and PURPLE — all carrying identical specs.

3000W — Top of the Hub-Drive Power Range

At 3000W continuous the brushless hub motor generates torque across the full speed range — not just at low speeds — which means the performance advantage is present whether you are climbing out of a slow technical section or accelerating hard on an open trail. Steep hill climbs, loose gravel, mud, and heavy loads feel manageable at a level that simply cannot be replicated at lower output levels.

The Smart Sine Wave controller ensures all 3000W of available output is delivered smoothly and progressively, protecting both the motor and the rider. For riders who want to step up progressively, the E-Bike Conversion Kit 2000W BLUE and E-Bike Conversion Kit 1500W BLUE offer the same blue colourway at reduced output levels.

BLUE — A Build That Commands Attention

The bold blue-anodised double-wall MTX rims are colour-matched front and rear, creating a fully cohesive blue build aesthetic across the entire bicycle. The blue finish signals performance and intent — a 3000W BLUE build stands out whether it is on a trail, in a workshop, or on a track. Against dark frames the blue creates sharp, immediate contrast; against silver or light frames it dominates the visual profile of the build.

Smart Sine Wave Controller — 48V–72V, 45A Continuous

The Smart Sine Wave 48V–72V 45A controller produces a smooth sinusoidal current wave for quieter operation, lower motor temperatures, and better mid-range efficiency than square-wave alternatives. Power delivery feels progressive and natural rather than abrupt — allowing precise torque modulation through technical sections and sustained, immediate acceleration on open terrain.

Whichever voltage you choose, ensure your battery is rated to sustain at least 45A continuous output to match the demands of the motor under full load. For the standalone controller, see our 48V–72V 45A eBike Controller. Browse all compatible packs on the Batteries category page.

Complete Electronics Package — What’s Included

A fully complete package — every part needed for a functional 3000W conversion is in the box:

27.5-Inch Double-Wall MTX Wheels — Built for 3000W Torque Loads

Both wheels are built to 27.5-inch diameter on double-walled MTX aluminium rims. The double-wall construction handles the mechanical stress of sustained high-power riding far better than single-wall alternatives — lateral rigidity keeps spoke tension consistent under repeated high-torque loading and maintains wheel trueness through sustained hard use. The 27.5-inch diameter fits any frame with a standard 135–138mm rear dropout, covering virtually all mountain bikes and hybrid frames.

Where the 3000W Sits in the All4eBikes Range

The 3000W kit sits above the 2000W hub motor range and is the highest-output complete wheel kit in the All4eBikes lineup. Builders who prefer to source their own rims can achieve the same motor performance through the bare-axle Rear Hub Motor 48V–72V 3000W. For riders who want to go further still, the Rear Hub Motor 72V 5000W is the next step up in outright hub-drive output.

For an overview of all power levels and options, browse the full e-hub wheel motor conversion kit range.

Warranty and Returns

Every E-Bike Conversion Kit 3000W BLUE purchased from All4eBikes is covered by a 12-month warranty against manufacturing defects across the motor and all included components, alongside a 30-day return window for complete purchase confidence.