E-Bike Conversion Kit 3000W BLACK — Rear Hub Motor, Full Electronics Package

The Stealth Performer — Power Without Compromise

The E-Bike Conversion Kit 3000W BLACK is a complete, high-output rear hub motor conversion featuring a 3000W brushless hub motor, black-anodised MTX wheels front and rear, and a Smart Sine Wave 48V–72V 45A controller. Clean, dark, purposeful — a build that makes a visual statement through restraint, and backs that restraint up with raw, uncompromising trail performance.

For the same specification in a coloured finish, the 3000W range is also available in RED, BLUE, and PURPLE — all carrying identical specs.

3000W — Top of the Hub-Drive Power Range

The E-Bike Conversion Kit 3000W BLACK operates at the top of the hub-drive power range, and the difference over lower-wattage kits is felt immediately in real-world off-road conditions. At 3000W continuous the brushless hub motor generates the torque needed to climb steep technical trails, push through loose terrain, and carry heavy loads without straining or overheating. This is the output level that turns a capable mountain bike into an electrified trail weapon.

For riders who want to step up progressively, the E-Bike Conversion Kit 2000W BLACK and E-Bike Conversion Kit 1500W BLACK offer the same black colourway at reduced output levels.

Smart Sine Wave Controller — 48V–72V, 45A Continuous

The Smart Sine Wave 48V–72V 45A controller ensures all 3000W of available power is delivered smoothly and progressively. Unlike the square-wave controllers found in budget kits, sine-wave commutation eliminates cogging, reduces electrical noise, and keeps the motor running cooler under sustained load. The result is a conversion that feels refined and controlled at all speeds — not just powerful at full throttle.

The 48V–72V voltage range gives full flexibility over battery selection.

Whichever voltage you choose, ensure your battery is rated to sustain at least 45A continuous output to match the demands of the motor under full load. For the standalone controller as an upgrade or replacement, see our 48V–72V 45A eBike Controller. Browse the full range of compatible packs on the Batteries category page.

Complete Electronics Package — What’s Included

A fully complete package — every part needed for a functional 3000W conversion is in the box:

27.5-Inch Double-Wall MTX Wheels — Built for 3000W Torque Loads

Both wheels are built to 27.5-inch diameter on double-walled MTX aluminium rims. At 3000W output, torque loads during hard acceleration far exceed what standard single-wall rim construction can sustain reliably. Double-wall MTX eliminates that failure mode — lateral rigidity keeps spoke tension consistent under repeated high-torque loading and maintains wheel trueness through sustained hard use. The 27.5-inch diameter slots into any frame with a standard 135–138mm rear dropout, covering virtually all mountain bikes and hybrid frames.

Where the 3000W Sits in the All4eBikes Range

The 3000W kit sits above the 2000W hub motor range and is the highest-output complete wheel kit in the All4eBikes lineup. Builders who prefer to source their own rims can achieve the same motor performance through the bare-axle Rear Hub Motor 48V–72V 3000W. For riders who want to go further still, the Rear Hub Motor 72V 5000W is the next step up in outright hub-drive output.

For an overview of all power levels and options, browse the full e-hub wheel motor conversion kit range.

Warranty and Returns

Every E-Bike Conversion Kit 3000W BLACK purchased from All4eBikes is covered by a 12-month warranty against manufacturing defects across the motor and all included components, alongside a 30-day return window for complete purchase confidence.