Spend £600, Save £20
Spend £1000, Save £40
Spend £300, Save £10
UK Stock, next day delivery available!
Shopping Cart
No products in the cart.
Sale!

Rear hub motor 72V 5000W

(1 customer review)

Original price was: £675.90.Current price is: £499.90.

The Rear hub motor 72V 5000W is the most powerful ebike conversion motor in the All4eBikes hub-drive range. This 5000 watt hub motor delivers extreme torque and aggressive acceleration on 72V systems, complete with a DC controller, SW900 colour display, 8-magnet PAS sensor, twist throttle and brake cut-off levers. Fits standard 26 inch rear dropouts. Built for off-road performance builds where only maximum output will do. Rated 5 out of 5.

Free Shipping

For any order above £19.90 shipping is free of charge.

30 Days Return Period

You have the right to return your orders within 30 days.

Warranty

12 months warranty from date of purchase.

Description

5000W eBike Conversion Kit 72V — Rear Hub Motor, the Pinnacle of Hub-Drive Power

72V system · 26 inch wheel · DC controller, SW900 display, PAS sensor, throttle and brake levers included · Off-road use only · 12-month warranty

5000W Continuous
72V Platform
26″ Wheel
Brushless Motor
SW900 Colour Display
8-Magnet PAS Sensor
Top of Range
12-Month Warranty
Power
5000W
Continuous output

Voltage
72V
Single voltage platform

Wheel Size
26″
Rear hub motor wheel

Display
SW900
Full colour LCD

Range Position
Top tier
Highest hub motor output

Warranty
12 months
Manufacturing defects


The Pinnacle of Hub-Drive Power — 5000W at 72V

This motor sits at the absolute top of the All4eBikes hub-motor range. Where the 3000W kits deliver serious off-road performance, the 5000W motor operates in an entirely different bracket — one defined by extreme torque, relentless acceleration and a top-speed capability that makes it the choice for performance-first off-road builds.

Running on a 72V battery system, this motor is designed to operate at a voltage level that pushes brushless hub motor performance to its practical limits for direct-fit bicycle conversions. The combination of high voltage and 5000W rated continuous output produces a torque and acceleration profile that is qualitatively different from anything a 1500W or 3000W motor can generate — felt immediately and consistently across every riding condition, from technical steep climbs to wide-open flat sprints.


Who This Motor Is Built For

This is not an all-purpose commuter upgrade. It is a purpose-built performance component for a specific type of rider and build:

Dedicated off-road performance builders constructing a custom electric mountain bike or off-road machine needing maximum hub-drive output for steep, technical terrain at speed.
Experienced DIY builders who have worked with lower-powered kits and understand the electrical, mechanical and safety requirements of high-current, high-voltage systems.
Riders upgrading from a 3000W system who have found the performance ceiling of their current build and want to step up without switching motor format.
Workshop builders and custom fabricators assembling high-performance off-road e-bikes where output and reliability are the primary specification requirements.
Speed and torque-focused enthusiasts riding on private land, enclosed tracks or dedicated off-road areas who want the most capable bolt-in hub motor experience available.

If the 5000W output represents more than you need, the E-Bike Conversion Kit 3000W BLACK and the 2000W 48V–72V motor are strong alternatives that deliver excellent off-road performance at lower power levels.


Complete Kit Contents — What’s Included

Supplied as a complete conversion kit containing every component needed to carry out a full functional installation:

Rear Hub Motor Wheel — 72V 5000W, 26″

The centrepiece of the build — brushless, high-efficiency, delivering massive continuous torque output with low noise and minimal maintenance.

DC Controller

Manages full power delivery from a 72V pack, handling high current demand with thermal and overcurrent protection. A standalone Sine Wave DC Controller is available separately should a replacement be needed.

SW900 Colour Display

Premium full-colour LCD — speed, battery level, power output, distance and assist mode. Also available independently.

8-Magnet PAS Sensor

Smooth, cadence-responsive pedal assist alongside throttle control. Stocked individually as a spare.

Twist Throttle

Direct throttle control over the full 5000W output — instant, responsive access at any speed.

Brake Cut-Off Levers

Instantly and completely cuts motor power on brake application — critical at the speeds this build is capable of reaching.


The 72V Advantage — Why Voltage Matters at This Power Level

The decision to build on a 72V platform rather than 48V or 52V is significant, and this motor is designed specifically to operate at this higher voltage. Higher voltage means lower current draw for the same power output — less heat in the wiring and controller, reduced voltage drop under load, improved efficiency across the operating range, and better sustained performance during extended high-power riding sessions.

At 5000W, these advantages are not marginal — they are the difference between a build that performs reliably under sustained demand and one that throttles back due to thermal limits.


Recommended Battery Pairing

The 72V platform opens up access to the highest-capacity battery packs in the All4eBikes range:

Flagship Recommendation
Triangle Battery 72V 30Ah 100A — 100A peak discharge and 30Ah capacity, enough to run this motor at significant output for extended sessions without premature voltage sag or range anxiety.

Strong Alternative
Triangle Battery 72V 30Ah 80A — the same capacity at a slightly lower peak discharge rating, suited to builds prioritising sustained rather than peak maximum output.


Brushless Motor Technology — Built for Durability and Silence

This motor uses a brushless design throughout. No physical contact between rotor and stator during operation means no brushes to wear out, no carbon dust to accumulate, and no periodic brush replacement to schedule. The brushless design delivers a motor that operates quietly, runs cooler than brushed equivalents at comparable power levels, and maintains consistent performance across tens of thousands of kilometres when paired with appropriate battery and controller hardware.

For riders who want to explore mid-drive as an alternative to hub-drive at high power levels, the BAFANG BBSHD Mid Drive 1000W offers a different performance profile — one where gear multiplication amplifies motor torque on climbs in ways a direct-drive hub motor cannot replicate. Both approaches are available at All4eBikes for direct comparison.


Warranty and Returns

Every Rear Hub Motor 72V 5000W purchased from All4eBikes is covered by a 12-month warranty against manufacturing defects across the motor and all included components, alongside a 30-day return window for complete purchase confidence.

Browse the full e-hub wheel motor range to explore all available power levels and find the right motor for every build.

Building a 72V High-Power System?

We’ll confirm battery, controller and frame compatibility before you order — get in touch on WhatsApp.

📍 2 Beresford Road Lane, Roath, Cardiff CF24 1QU  |  📞 07920 781 258

Message Us on WhatsApp

Disclaimer: This motor exceeds UK EAPC legal limits and is for off-road and private land use only. It must not be used on public roads, cycle paths or any public space.

Specification Value
Product Name Rear Hub Motor 72V 5000W Conversion Kit
Motor Type Rear Hub Brushless Motor
Rated Power 5000W
Voltage 72V
Wheel Position Rear Wheel
Peak Speed Up to 60mph (depending on setup)
Motor Efficiency High Efficiency Brushless Design
Controller High Performance Smart Brushless Controller Included
Display LCD / SW900 Display
Throttle Thumb / Twist Throttle Included
PAS Sensor Included
Brake Levers E-Brake Levers Included
Wheel Sizes Available 26”
Rim Material Double Wall Aluminum Alloy
Battery Compatibility 72V Lithium Batteries
Recommended Battery Capacity 25Ah – 50Ah
Compatible Bike Types MTB, Fat Bike, Enduro, Downhill, Custom High-Power eBike Builds
Water Resistance Water-Resistant Connectors
Installation Type Plug & Play Connectors
Noise Level Low Noise Operation
Usage Extreme Performance, Off-Road and Custom eBike Conversions
Kit Includes Rear motor wheel, controller, display, throttle,
PAS sensor, brake levers and wiring
Warranty Manufacturer Warranty Included

1 review for Rear hub motor 72V 5000W

  1. Rossi V

    Awesome! Super fast!!!

Add a review

Your email address will not be published. Required fields are marked *