E-Bike Conversion Kit 1500W RED — Rear Hub Motor, Full Electronics Package

Bold Finish. Serious Power.

The E-Bike Conversion Kit 1500W RED is a complete, high-performance rear hub motor conversion built around a 1500W brushless MTX hub motor, finished in a striking all-red colourway across both the rear motor wheel and the matching front MTX wheel. Paired with a 36V–52V 35A controller and a full set of matched components, this kit delivers genuine performance output with a finish that makes every build impossible to miss.

For the same specification in other finishes, see the 1500W BLACK, 1500W BLUE, and 1500W PURPLE — all carrying identical specs.

1500W Brushless Hub Motor — High Output, Broad Capability

At 1500W continuous output this motor covers the full range of demanding use cases — steep hill climbing with load, sustained high-speed riding, heavy commuter builds, and performance trail riding. Substantially more torque from a standing start than a 750W or 1000W equivalent, with a power band that stays wide and usable throughout the speed range rather than tapering as motor back-EMF builds.

Brushless motor architecture keeps the drivetrain quiet, cool, and maintenance-free — no brushes to degrade, no commutator surfaces to wear, consistent magnetic power transfer on every ride regardless of how hard you push it.

For builders considering the step above, the E-Bike Conversion Kit 2000W carries 500W more continuous output and a Smart Sine Wave 45A controller upgrade.

RED — A Finish That Commands Attention

The all-red colourway is applied consistently across both the rear MTX motor wheel and the front MTX wheel — red-anodised double-wall rims with matching red hub casings that create a cohesive, high-impact visual identity across the entire wheel set. Against dark or black frames, the red finish delivers maximum contrast and immediate visual impact. Against neutral or silver frames, it reads as a bold accent that defines the entire aesthetic of the build.

Performance and reliability are consistent across every colour variant in the 1500W range — the only difference is what your wheels look like.

48V and 52V Compatibility — Voltage That Scales With Your Build

The 1500W hub motor is rated for both 48V and 52V systems, making this kit equally capable as a 48V or 52V conversion depending on your battery choice.

Start with a 48V pack you already own, upgrade to 52V when you’re ready — the motor and controller handle both without any hardware changes. Browse compatible packs on the Batteries category page.

Complete Electronics Package — What’s Included

Every component needed for a complete rear hub motor conversion is in the box — pre-matched for 1500W operation, no separate sourcing required:

MTX Double-Wall Rims — Built for 1500W Torque Loads

Both wheels are built on double-walled aluminium MTX rims — the correct construction standard for high-power hub motor conversion kits. At 1500W output, the torque loads applied to the rear wheel during hard acceleration exceed the long-term structural capacity of standard single-wall rim construction. Double-wall MTX eliminates that failure mode — the additional lateral rigidity maintains spoke tension consistency under repeated high-torque loading and keeps both wheels running true through sustained hard use.

Where the 1500W Sits in the All4eBikes Range

The 1500W motor sits above the mainstream 1500W hub motor kits and represents the top of the 48V/52V performance bracket. For riders who want to go further, the 2000W 48V–72V is the natural next step into the higher-voltage platform.

For an overview of all power levels and wheel kit options, browse the full e-hub wheel motor conversion kit range.

Warranty and Returns

Every E-Bike Conversion Kit 1500W RED purchased from All4eBikes is covered by a 12-month warranty against manufacturing defects across the motor and all included components, alongside a 30-day return window for complete purchase confidence.