Description
Ebike Battery 48V 15Ah — Compact Lithium-Ion Pack with 30A BMS and 3A Charger
Supports 48V motors up to 1000W · 30A BMS protection · Weather-resistant casing · 3A charger included · 12-month warranty
15Ah Capacity
30A BMS
Up to 1000W Motors
Compact Footprint
3A Charger Included
Weather-Resistant Casing
12-Month Warranty
15Ah Capacity — More Range, Same Compact Format
The difference between the 13Ah and 15Ah formats in this compact 48V battery range is straightforward — this battery stores more energy in the same physical form factor, delivering more range per charge without requiring a larger battery or a different mounting bracket. For a 48V motor system consuming 15–20Wh per kilometre under mixed conditions, the 15Ah capacity represents an estimated 36–48km range per charge compared to approximately 31–41km from the 13Ah equivalent.
That additional range matters for riders who are regularly running close to the limits of their current pack — commuters who occasionally find themselves arriving home with very little charge left, or recreational riders who want more freedom to extend their routes without anxiety about range.
The compact format that defines this battery pack remains unchanged from the 13Ah variant — the same space-efficient downtube profile that fits where larger packs won’t, the same mounting bracket compatibility across compact frame geometries, and the same clean, unobtrusive integration into the bicycle’s down tube position.
30A BMS — Correctly Specified for 1000W Motor Systems
The Battery Management System is rated at 30A continuous discharge — the correct specification for 48V motor systems rated up to 1000W. At 48V nominal, 30A continuous discharge delivers up to 1440W of sustained power draw — providing meaningful headroom above the 1000W motor ceiling this battery supports, ensuring the BMS does not trip under normal hard riding conditions including sustained hill climbing, loaded acceleration and high-speed flat riding. The 30A rating precisely matches the motor compatibility of this pack — it is not over-specified unnecessarily, and it is not under-specified for the motor range it serves.
Terminates charging when cells reach maximum safe voltage
Enforces the low-voltage cut-off to protect cell chemistry
Immediate system shutdown on wiring fault or connector failure
All three operate transparently and continuously — no user interaction required, no maintenance needed.
48V Nominal Voltage — The Conversion Market Standard
The 48V platform is the backbone of the e-bike conversion market — the most widely supported voltage standard across motor controllers, displays, mid drive systems and hub motor kits. This battery operates at 48V nominal, placing it at the centre of the broadest possible motor compatibility range. Running a 48V system produces significantly more power at the same current draw than a 36V equivalent — stronger acceleration, higher top-end speed, and better hill-climbing capability from identical motor hardware.
The 48V nominal voltage also ensures this battery is directly compatible with any standard 48V motor controller without voltage adjustment, making it a straightforward drop-in energy source for new builds and replacement upgrades alike.
Weather-Resistant Casing — Built for Outdoor Use
The durable, weather-resistant casing on this small battery is not a cosmetic specification — it is a functional requirement for a battery used daily in outdoor conditions. British weather delivers rain, spray and humidity across the majority of the riding year, and a battery that is not protected against moisture ingress will eventually suffer electrical degradation at the BMS connections or cell terminals. The weather-resistant casing protects the internal cell assembly and BMS electronics from these conditions during normal riding use — wet commutes, light rain, road spray — maintaining electrical integrity across the full service life of the pack. The casing also provides mechanical protection against vibration and incidental impact from everyday riding on urban roads and mixed terrain.
Included 3A Charger — Complete and Ready to Use
This battery ships with a 3A charger included — a practical advantage that eliminates the additional cost and compatibility research associated with sourcing a matched charger separately. The 3A charge rate delivers a full charge from empty in approximately 5 hours, fitting naturally into an overnight charging routine that tops the pack up ready for the next day’s ride. The charger terminates automatically when the pack reaches full charge voltage, eliminating any risk of overcharge regardless of how long it is left connected.
The included charger is matched to the battery’s charge cut-off voltage, ensuring safe, reliable charging from the first cycle. No compatibility checking, no adapter required, no additional purchase — the battery pack arrives complete and ready to install.
Perfect for Compact Frame Conversions
This battery is designed specifically for compact eBike frames and conversion setups where available space along the down tube is limited. Smaller frame sizes — particularly in the S and M range for both road and mountain bike geometries — often cannot physically accommodate the larger 20Ah and 25Ah battery formats without frame clearance conflicts. The compact downtube profile of this battery resolves that constraint, delivering 48V 15Ah capacity in a form factor that fits where larger packs simply won’t. It is also the practical choice for builds where visual cleanliness is a priority — a smaller battery integrates more discreetly into the frame profile, maintaining a proportionate appearance that larger packs on smaller frames cannot achieve.
Compatible Motor Systems
This battery is compatible with all 48V motor systems rated up to 1000W, including BAFANG BBS01 250W, BBS02 750W mid drive systems, and 48V hub motor conversion kits across the 250W–1000W output range. The 30A BMS sustains full output from any motor in this range without protection threshold issues under normal riding conditions.
For builds requiring more capacity, higher voltage, or a higher BMS rating for 1500W motor systems, the full range of 48V and 52V battery options is available on the Batteries category page. For compatible conversion kits across all motor formats and power levels, visit the Conversion Kit category page.
Warranty and Returns
Every Ebike Battery 48V 15Ah purchased from All4eBikes is covered by a 12-month warranty against manufacturing defects, alongside a 30-day return window for complete purchase confidence.
Not Sure if This Battery Fits Your Build?
We’ll confirm motor compatibility and frame clearance before you order — get in touch on WhatsApp.
📍 2 Beresford Road Lane, Roath, Cardiff CF24 1QU | 📞 077920781258




Reviews
There are no reviews yet.